Thursday, December 15, 2022

Gold Embossing on Vellum

My friend asked me to demonstrate how to heat emboss on vellum. I used gold embossing powder and only enough heat to melt the embossing powder. If you leave the heat on for too long, the vellum will burn. The Stampin' Up heat tool has two settings, which makes it a little easier to keep from burning your vellum. I have a heat tool with only one setting, so I have to be a little more careful while embossing.

This is the final Christmas card I will be making for you this year. I hope you enjoyed my videos and tried making some of these cards. Have a blessed day and have fun stamping.


Supplies:
  • 158972 - Trimming the Tree Stamp Set
  • 159538 - Christmas Lights Stamp Set
  • 156470 - Gold Ribbon
  • 159963 - Festive Pearls
  • 159878 - Very Best Trio Punch
  • 104430 - Stampin' Dimensionals
  • 110755 - Multipurpose Liquid Glue
  • 103683 - Mini Glue Dots
  • 102283 - Versamark Pad
  • 155555 - Gold Embossing Powder
  • 159971 - Embossing Additions Tool Kit
  • 129053 - Heat Tool
  • 101856 - Vellum CS
    • 5-1/4"x 4"
  • 119685 - Cherry Cobbler CS
    • 5-1/4"x 4"
    • scrap for sentiment
  • 159267 - Orchid Oasis CS
    • 8-1/2"x 5-1/2" scored at 4-1/4"
  • 101656 - Very Vanilla CS
    • 4-7/8"x 3-5/8"
  • 132622 - Gold Foil Sheet (scrap for corners)


 

Lights Aglow Christmas Card #3

I used different colors of glimmer paper along with the Lights Aglow DSP to create this Christmas card. I know that most of these products are retiring or have already sold out, but was confident that many of you have some of them on hand already.

I am trying to use as much of these supplies as I can so I can make room for the new products that are in the January to June 2023 mini catalog. I hope you enjoy my cards and will try making them yourself.

Have a blessed day and have fun stamping!


Supplies:
  • 156353 - Merriest Moments Stamp Set
  • 156385 - Merriest Frames Hybrid Dies
  • 158983 - Organic Beauty Dies
  • 159538 - Christmas Lights Stamp Set
  • 159183 - Stylish Shapes Dies (3rd from largest circle)
  • 159878 - Very Best Trio Punch
  • 155576 - Evening Evergreen Ink Pad
  • 161822 - Gold Adhesive-Backed Swirls
  • 144237 - Very Vanilla Thick Card Stock
    • 8-1/2"x 5-1/2" scored at 4-1/4"
  • 107300 - Very Vanilla Envelopes
  • 159537 - Glimmer Paper
    • Gold - 3" square
    • Evening Evergreen - (2) 5-1/2"x 1/4", scrap for leaves
    • Very Vanilla - scrap for small embellishment
  • 159578 - Real Red Glimmer Paper
    • 1-3/4" square for flower
  • 159535 - Lights Aglow DSP
    • 3" square
    • (2) 5-1/2"x 1/2"
    • (2) 3"x 1-1/2"
  • 104430 - Stampin' Dimensionals or 2-3/4" square piece of card board
  • 110755 - Multipurpose Liquid Glue
  • 103683 - Mini Glue Dots
  • 102283 - Versamark Ink Pad
  • 155555 - Gold Embossing Powder
  • 159971 - Embossing Additions Tool Kit
  • 129053 - Heat Tool
 

Wednesday, December 7, 2022

Lights Aglow Christmas Card #2

I've created another Christmas card for you using the Lights Aglow DSP. I have been making most of my Christmas cards using this DSP and still haven't used up a whole pack of it. Wow! I should have started on my Christmas cards months ago. These cards are easy to make and so beautiful!

I listed all the supplies and dimensions below as well as a link to my YouTube video demonstrating the steps to assemble this card. In order to keep this video short, I did the heat embossing with gold embossing powder off camera. If you have any questions, please leave a comment below this post or on my video and I will answer them for you.

Thank you for watching and have a blessed day! 

Supplies:
  • 159542 - Brightest Glow Stamp Set
  • 159538 - Christmas Lights Stamp Set
  • 155776 - Soft Succulent CS
    • 8-1/2"x 5-1/2" scored at 4-1/4"
  • 101650 - Very Vanilla CS
    • 4-7/8"x 3-5/8" for inside panel
    • 1-3/4" square for die cutting or
    • 1-1/2" square if you don't have the dies
  • 159535 - Lights Aglow DSP
    • 5-1/4"x 4"
    • 5-1/4"x 2"
    • 3" square
  • 159537 - Gold Glimmer Paper
    • 3" square
    • (2) 5-1/4"x 1/4"
  • 159183 - Stylish Shapes Dies (2nd from smallest square)
  • 159963 - Festive Pearls
  • 156311 - Gold Holly Leaves
  • 159555 - Gold & Vanilla Statin-Edged Ribbon
  • 159878 - Very Best Trio Punch
  • 107300 - Very Vanilla Envelopes
  • 104430 - Stampin' Dimensionals
  • 110755 - Multipurpose Liquid Glue
  • 103683 - Mini Glue Dots
  • 102283 - Versamark Pad
  • 155555 - Gold Embossing Power
  • 159971 - Embossing Additions Tool Kit
  • 129053 - Heat Tool



 

Thursday, December 1, 2022

Lights Aglow Christmas Card

 

     I love making Christmas cards and the Lights Aglow DSP makes it so easy to create them. When you pair it up with the stamps and dies that Stampin' Up has to offer us, you can make some really beautiful cards to send to friends and family. 
    I thought about using gold embossing powder for the sentiments, but decided the Real Red Ink looked stunning. I think I will play around with this layout using some of the other DSP and see what I come up with. Please let me know what you think and what you come up with.
     Be sure to check the retiring list because some of these products are on sale starting December 1, 2022. The retiring products are always while supplies last so don't wait until the last minute to get your order in. Have a blessed day and have fun stamping!
     (I'm really sorry, but the Tree Trimmings Dies are no longer available.)


Supplies:
  • 158972 - Trimming the Tree Stamp Set
  • 159551 - Labels Aglow Dies
  • 151770 - Layering Circles Dies
  • 159963 - Festive Pearls
  • 156470 - Gold Shimmer Ribbon
  • 149699 - Stampin' Seal
  • 104430 - Stampin' Dimensionals
  • 110755 - Multipurpose Liquid Glue
  • 107300 - Very Vanilla Envelopes
  • 147084 - Real Red Ink Pad
  • 155574 - Evening Evergreen Card Stock
    • 8-1/2"x 5-1/2" scored @ 4-1/4"
  • 101656 - Very Vanilla Card Stock
    • 4-7/8"x 3-5/8"
    • 2"x 2"
  • 15957 - Gimmer Paper-Evening Evergreen
    • 3-1/4"x 3-1/4"
  • 159535 - Lights Aglow DSP
    • 5-1/4"x 4"
    • 3-5/8"x 1/2"
    • 3"x 3"



Taking a Break from Stamping

I just wanted to let everyone who follows me know why I have been taking a break from stamping and haven't done any YouTube videos for t...